Description
Technical specifications:
BAR TRANSFER TYPE OVERHEAD CONVEYOR SYSTEM
- Includes conveyor monorail, its construction to the walls, roof and to the factory ground and trolley hangers for manual use.
- Transfer bars and hooks are not included.
- Total track length : 101 m
- Trolley quantity : 24 pcs 4-wheel trolley
- 1 bar shall be carried by 3 trolleys
- Trolley load capacity : 100 kg
- Overhead transfer trolley : 4-track trolley – 1 set
- Trolley drive : Manual
POWDER COATING OVEN
- Purpose of use : Powder curing
- Maximum temperature : 220ºC
- INNER DIMENSIONS: Length : 5.000 mm, Width : 1.500 mm, Height : 2.600 mm
- Material of the outer surface : 1mm CRS sheet
- Material of the inner surface : 1mm Galvanized steel sheet
- Insulation thickness : 150 mm
- Insulation : Base – 50mm of Rock wool (50 kg/m³)
- Side walls – 150mm of Rock wool (50 kg/m³)
- Roof – 150mm of Rock wool (50 kg/m³)
- Heat transfer : Convection, by closed air circuit
- Heating Type : Indirect heating
- Temperature control : On/Off, 0-400ºC Digital thermostat,
- Fe-Const (J-type) thermo-couple
- Ambient temperature : +10ºC (while working)
- Oven uniformity : ±2,5ºC (5ºC in total)
- Control accuracy : ±1ºC
- Heat-up time : 35-45 min (empty oven)
- Oven energy demand : 70.000 kcal/h
- Oven doors : Manual, Hinge type
- Loading/Unloading : Hand pushed from shop floor into the oven
CONTROL PANEL AND ELECTRICAL INSTALLATION
POWDER COATING FILTER
VFDK-3 WALL TYPE POWDER COATING BOOTH
VM VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM
- Input voltage : 220V 50Hz
- Air need : 350 lt/min
- Input pressure : 6 bar
- Vibration motor : 220V 25W
- Gross weight : 80 Kg
VG4 ELECTRONIC AND PNEUMATIC CONTROLLER
- Nominal input voltage : 100-240 VAC
- Frequency : 50-60 Hz
- Connected load : 40 VA
- Nominal output voltage : 10 V
- Nominal output current : 1,2 A
- Protection type : IP54
- Temperature range : 0-40°C (32-104°F)
- Max.surface temperature: 85°C (+185°F)
MANUAL POWDER COATING GUN
- Gun Type : Corona System
- Polarization : Negative
- Cascade input voltage : 0-10,5V DC
- Output voltage : 100 kV
- Output current : 0 -150 μA
- Powder output (3,5 bar) : 500 g/min
- Protection class : IP 54
- Voltage cable length : 5.0 m
- Powder hose length : 5.0 m
- Gun weight (gross) : 443 g
- Nozzle : Ø16-20-24mm deflector + nozzle
SPRAY BOTTH 5300 X 3000 with pressure and ventilation system
