SUMMA – Flatbed cutter – F1612

0,00

 

MO

 

DEL

Summa F1612
CUTTING AREA 63 in. (160 cm) wide x 47.2 in. (120 cm) long up to 164 ft. (50 m) long in multi panel
MEDIA WIDTH Up to 65 in. (165 cm)
MULTI PANEL* 1968 in. (5000 cm) *Media clamps and roll-feed and/or conveyor belt system are required
REPEATABILITY Within +/- 0.05 mm on plots
ACCURACY 0.05 % of move or 0.05 mm, whichever is greater
SPEED Up to 39.4 in./sec (1000 mm/sec)
ACCELERATION Up to 1 G
CLEARANCE* 1.9 in. (5 cm) *Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting matt or conveyor belt
MAXIMUM ALLOWED FORCES Vertical: 200 Newton, Horizontal: 200 Newton
MAXIMUM TABLE LOAD 10.2 lb/ft2 (50 kg/m2)
CONNECTIVITY USB
POWER REQUIREMENTS 3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N
DIMENSIONS 92.5 x 76.3 x 43.3 in. (235 x 194 x 110 cm) – without roll support
WEIGHT 1100 lbs (500 kg)
OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES Drag Knife Module, Conveyor System, Roll-Feed System, Safety Beam System, Pneumatic Pack, wireless controller w/ charger, standard 36˚ blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), CD w/ manuals and drivers
OPTIONAL ACCESSORIES Tangential Knife Module, F Series Router System, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, SummaFlex™, SummaFlex Pro™ production software

 

 

Out of stock

SKU: 1639 Category:

Description

 

MO

 

DEL

Summa F1612
CUTTING AREA 63 in. (160 cm) wide x 47.2 in. (120 cm) long up to 164 ft. (50 m) long in multi panel
MEDIA WIDTH Up to 65 in. (165 cm)
MULTI PANEL* 1968 in. (5000 cm) *Media clamps and roll-feed and/or conveyor belt system are required
REPEATABILITY Within +/- 0.05 mm on plots
ACCURACY 0.05 % of move or 0.05 mm, whichever is greater
SPEED Up to 39.4 in./sec (1000 mm/sec)
ACCELERATION Up to 1 G
CLEARANCE* 1.9 in. (5 cm) *Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting matt or conveyor belt
MAXIMUM ALLOWED FORCES Vertical: 200 Newton, Horizontal: 200 Newton
MAXIMUM TABLE LOAD 10.2 lb/ft2 (50 kg/m2)
CONNECTIVITY USB
POWER REQUIREMENTS 3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N
DIMENSIONS 92.5 x 76.3 x 43.3 in. (235 x 194 x 110 cm) – without roll support
WEIGHT 1100 lbs (500 kg)
OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES Drag Knife Module, Conveyor System, Roll-Feed System, Safety Beam System, Pneumatic Pack, wireless controller w/ charger, standard 36˚ blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), CD w/ manuals and drivers
OPTIONAL ACCESSORIES Tangential Knife Module, F Series Router System, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, SummaFlex™, SummaFlex Pro™ production software