Description
| TRAVELS | S.A.E | METRIC |
|---|---|---|
| X Axis | 40.0 in | 1016 mm |
| Y Axis | 16.0 in | 406 mm |
| Z Axis | 16.0 in | 406 mm |
| Spindle Nose to Table (~ max) | 20.0 in | 508 mm |
| Spindle Nose to Table (~ min) | 4.0 in | 102 mm |
| SPINDLE | S.A.E | METRIC |
|---|---|---|
| Max Rating | 7.5 hp | 5.6 kW |
| Max Speed | 6000 rpm | 6000 rpm |
| Max Torque | 33.0 ft-lbf @ 1200 rpm | 45.0 Nm @ 1200 rpm |
| Drive System | Direct Speed, Belt Drive | Direct Speed, Belt Drive |
| Taper | CT or BT 40 | CT or BT 40 |
| Bearing Lubrication | Grease Packed | Grease Packed |
| Cooling | Air Cooled | Air Cooled |
| TABLE | S.A.E | METRIC |
|---|---|---|
| Length | 57.8 in | 1466 mm |
| Width | 10.5 in | 267 mm |
| T-Slot Width | 0.626 in to 0.630 in | 15.90 mm to 16.00 mm |
| T-Slot Center Distance | 4.00 in | 102 mm |
| Number of Std T-Slots | 3 | 3 |
| Max Weight on Table (evenly distributed) | 1000 lb | 454 kg |
| FEEDRATES | S.A.E | METRIC |
|---|---|---|
| Max Cutting | 400 ipm | 10.2 m/min |
| Rapids on X | 400 ipm | 10.2 m/min |
| Rapids on Y | 400 ipm | 10.2 m/min |
| Rapids on Z | 400 ipm | 10.2 m/min |
| AXIS MOTORS | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 2000 lbf | 8896 N |
| Max Thrust Y | 2000 lbf | 8896 N |
| Max Thrust Z | 2000 lbf | 8896 N |
| TOOL CHANGER | S.A.E | METRIC |
|---|---|---|
| Type | Carousel | Carousel |
| Capacity | 10 | 10 |
| Max Tool Diameter (full) | 3.5 in | 89 mm |
| Max Tool Weight | 12 lb | 5.4 kg |
| Tool-to-Tool (avg) | 5.7 s | 5.7 s |
| Chip-to-Chip (avg) | 6.5 s | 6.5 s |
| AIR REQUIREMENTS | S.A.E | METRIC |
|---|---|---|
| Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
| Inline Air Hose | 3/8 in | 3/8 in |
| Coupler (Air) | 3/8 in | 3/8 in |
| Air Pressure Min | 80 psi | 5.5 bar |
| DIMENSIONS – SHIPPING | S.A.E | METRIC |
|---|---|---|
| Domestic Pallet | 130 in x 78 in x 99 in | 331 cm x 199 cm x 251 cm |
| Export Pallet | 130 in x 78 in x 99 in | 331 cm x 199 cm x 251 cm |
| Weight | 5200 lb | 2359.0 kg |
| ELECTRICAL SPECIFICATION | S.A.E | METRIC |
|---|---|---|
| Spindle Speed | 6000 rpm | 6000 rpm |
| Drive System | Direct Speed, Belt Drive | Direct Speed, Belt Drive |
| Spindle Power | 7.5 hp | 5.6 kW |
| Input AC Voltage (1 Phase) | 220 VAC | 220 VAC |
| Full Load Amps (1 Phase) | 40 A | 40 A |
| ` | 220 VAC | 220 VAC |
| Full Load Amps (3 Phase) – Low | 25 A | 25 A |
| Input AC Voltage (3 Phase) – High* | 440 VAC | 440 VAC |
| Full Load Amps (3 Phase) – High* | 13 A | 13 A |
*Haas machines are designed to operate on 220 VAC power. An optional internal high-voltage transformer (380 – 480 VAC) is available for all models, except the Desktop Mill, CL-1, and CM-1.
