Description
Technical specification:Maximum cutting length 3800 mm
Maximum push stroke 3800 mm
Maximum blade protrusion from the worktable 75 mm
Maximum panel clamping opening 65 mm
Worktable height 985 mm
Basic configuration complete with
Main blade motor 7.5 kW (10 HP).
Scoring blade motor 2.2 kW (3 HP).
Brushless motor for saw carriage movement – speed 1-120 m/min.
Brushless motor for pusher movement – maximum speed 60 m/min*.
Side aligner integrated into the saw carriage (min. 0 – max. 3500 mm).
1 Main blade, diameter 320 mm.
1 Scoring blade, diameter 200 mm (conical tooth).
7 Pneumatic clamps (positioned at 50 – 150 – 360 – 990 – 1740 – 2490 – 3240 mm).
1 Air cushion table, 2050 x 620 mm, with rounded profile and left-side squaring support.
1 Air generator (max. 6 curtain plates).
10 Extruded profiles with 50 mm diameter idle wheels.
Dust extraction
1 extraction port on the 100 mm squaring side upright
3 extraction ports on the 100 mm presser
1 extraction port on the 150 mm blade carriage
Min. speed Air flow required at the suction ports
26 m/sec
Required suction flow rate: 4600 m3/h
Maximum power used: 15 kW on the machine in its basic configuration at an operating voltage of 380
V/50 Hz.
Connection to the electrical distribution network is in the electrical cabinet, blade change side.
Operating Temperature
The operating temperature must be within the following ranges:
Minimum temperature: +5°C
Maximum temperature: +35°C
Pneumatic Supply
Minimum operating pressure: 6 bar
Average consumption on a basic cycle: 103 Nl/min
Minimum hose diameter: Ø12 (1/2”)
