Technical Sheet:Description
| Electrical equipment | |||
| Operating voltage 400 volts —3 Ph — 50 Hz | |||
| Switch cabinet installed | |||
| Installed according to European standard EN 60204 | |||
| Actuation of a suction device provided by the customer via two relay contacts: | |||
| – | Interface 1 for switching the suction device on as soon as the feed is running | ||
| – | Interface 2 for opening the suction flaps as soon as the machine is occupied | ||
| Electronic frequency converter with motor braking function | |||
| The machines are not suitable for
connection to an RCD due to operational leakage currents. Instead, it is advisable to route the supply line so as to prevent ground faults or short circuits (e.g. in accordance with DIN VDE 0100-520/521.11) |
|||
| Country-specific operating voltage adjustment via transformer (optional) | |||
| Electrical equipment with modular control system
for increased operator comfort |
|||
| In the event of line voltage fluctuations greater than +/- 10%, a voltage stabilizer must be installed at the place of use | |||
| Specified ambient temperature: +10 to 40°C | |||
| The electrical connection at the main switch is designed for single-wire copper.
The connection cross-section depends on the size of the main switch. For other designs or questions about the maximum electrical connection cross-section, the manufacturer must be consulted |
|||
| If the machine deviates from the standard supply voltage of 400 volts, a corresponding isolating transformer is used | |||
