Description
Technical Specifications
| TECHNICAL SPECIFICATION | INJECTION UNIT | UNIT | KRD 568 | ||
|---|---|---|---|---|---|
| A | B | C | |||
| VİDA ÇAPI | SCREW DIAMETER | mm | 80 | 85 | 90 |
| L/D ORANI | SCREW L/D RATIO | L/D | 22,3 | 21 | 19,8 |
| BASKI DEĞERİ | CYLINDER HEAD VOLUME | cm3 | 2185 | 2467 | 2766 |
| ENJEKSİYON AĞIRLIĞI | INJECTION WEIGHT | g | 1989 | 2245 | 2517 |
| ENJEKSİYON ORANI | INJECTION RATE | g/s | 420 | 474 | 532 |
| ENJEKSİYON BASINCI | INJECTION PRESSURE | Mpa | 189 | 167 | 149 |
| ENJEKSIYON STROKU | INJECTION STROKE | mm | 435 | ||
| VİDA HIZI | SCREW SPEED | rpm | 150 | ||
| MENGENE ÜNİTESİ | CLAMP UNITS | ||||
| MENGENE KUVVETİ | CLAMP FORCE | KN | 5680 | ||
| MAKAS STROKU | MAX. MOLD. OPENING STROKE | mm | 820 | ||
| KOLON MİLİ MESAFESİ | SPACE BETWEEN TIE BARS | mm | 820×820 | ||
| MİN. KALIP ÖLÇÜLERİ | MIN. MOULD SIZE | mm | 570×570 | ||
| MiN. KALIP KALINLIĞI | MIN. MOULD HEIGHT | mm | 350 | ||
| MAX. KALIP KALINLIĞI | MAX. MOULD HEIGHT | mm | 820 | ||
| KALIP DELİK ÖLÇÜSÜ | DIA OF MOLD LOCATION HOLE | mm | 200H7 | ||
| İTİCİ STROĞU | EJECTOR STROKE | mm | 230 | ||
| İTİCİ GÜCÜ | EJECTOR FORCE | KN | 158 | ||
| İTİCİ PİM SAYISI | NUMBER OF EJECTOR PINS | adet/ piece |
17 | ||
| MAX. POMPA BASINCI | RATED PRESSURE OF OIL PUMP | Mpa | 16 | ||
| SERVO MOTOR GÜCÜ | SERVO MOTOR POWER | kW | 37.6+37.6 | ||
| ISITICI GÜCÜ | HEATING CAPACITY OF SCREEW CYLINDER | kW | 34.6 | ||
| REZİSTANS ADEDİ | HEATING SECTION | 5+1 | |||
| YAĞ TANKI KAPASİTESİ | OIL TANK CAPACITY | L | 950 | ||
| MAKİNE ÖLÇÜLERİ | MACHINE DIMENSIONS(LxWxH) | m | 8.95×2.04×2.90 | ||
| MAKİNE AĞIRLIĞI | MACHINE WEIGHT | TON | 20 approx. | ||
