Schwarzmueller GmbH – 3-axle semi-trailer – POWER LINE Series

WEIGHTS

• Gross train weight (perm.): 40 t
• Gross weight (techn.): 39 t
• Axle assembly load (techn.): 27 t
• Fifth-wheel load (techn.): 12 t
• Tare weight: approx. 6 t

DIMENSIONS

• Internal platform length: approx. 13,620 mm
• Internal platform width: approx. 2,480 mm
• Total width: 2,550 mm
• Load space internal height: approx. 2,720 mm
• Lateral loading height below guide rail: approx. 2,620 mm
• Internal width between guide rails: approx. 2,430 mm
• Portal loading height: approx. 2,620 mm
• Portal loading width: approx. 2,480 mm
• Loading height: approx. 1 5 0 mm over fifth-wheel height

FRAME

• Welded steel frame construction – lightweight design
• Reinforced for point loading = coil transport (27 t at centre of gravity across min. 2,000 mm length)
• Frame for unladen fifth-wheel height of 1,120 – 1, 19 0 mm with air-sprung STT
• Replaceable 2″ kingpin (EC installation dimension,
• width across corners: 2,040 mm)
• Perforated external frame with approx. 100 mm hole spacing, 40/25 mm slot according to DIN EN 12640 and 21 pairs of recessed 2.5 t lashing points/rings, and an additional 5 pairs of 4 t lashing points in the recess area on the external frame

CHASSIS

• Air suspension with lifting and lowering device (approx. +120/-80 mm)
• Automatic adjustment of driving level from 15 km/h
• air suspension unit with low-maintenance 430 mm disc brake axles
• 3 x 9 t rigid, wheelbase 2 x 1,310 mm
• Tyres :
• 6 x 385/65 R 22.5 160J, manufacturer as per factory specifications
• 6 steel wheel rims 11.75 x 22.5, 10-hole, 120 mm rim offset, silver

SUPPORT FIXTURES

Mechan. 2 x 12 t support jacks, single-sided operation and thrust compensation, manufacturer as per factory specifications

BRAKE SYSTEM

• Brake system according to EC Directive 71/320 or E CE R13
• Two-line brake
• EBS – electronic brake system
• Wabco 2S2M = one axle sensed
• RSS – stability program
• Spring-loaded parking brake on 2 axles
• Aluminium air tank

FLOOR

• Resin-coated plywood floor, 27 mm, flush with external frame
• 2 steel top-hat rails over the longitudinal beams, in front of the coil trough
• (floor load capacity 5,460 kg stacker axle load according to CSC)

ELECTRICAL EQUIPMENT

• 24 V lighting system according to EC Directive 76/756/E WG
• 2 seven-chamber tail lights in underride protection
• LED side marker lights
• 2 clearance lamps
• 2 contour lights on underride protection
• 2 x 7-pin and 1 x 15-pin socket

PAINTWORK

• Blasted with steel granulate, treated with zinc dust primer and spray painted with 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
• Plastic and hot-dip galvanised parts unpainted,
• powder-coated attachments/installation parts black
• Reflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48

ACCESSORIES

Rear markings as per ECE standards (horizontal on rear doors/rear wall)

ATTACHMENTS

• Rear crash guard with portal post protection and lower post reinforcement
• Wheel chock(s) as per regulations
• 1 x retractable step unit at rear right
• Single wheel plastic mudguards with spray protection as per regulations
• Aluminium tarpaulin mounting strips bolted on both sides of external frame
• Aluminium underride protection, coated white
• Side impact protection made from aluminium profiles as per regulations, coated black
• 1 spare wheel bracket for 1 spare wheel (rear right)
• 1 plastic toolbox, lockable, unpainted , on left after axle

SIDE WALLS/SLIDING TARPAULIN

• Fixed aluminium hollow profile front wall, 2,400 mm, with 2 centre supports, 2 lashing rings inside for load securing
• Closed with tarpaulin over front wall, in same colour as side tarpaulin
• Front wall reinforced inside with galvanised steel plate, approx. 650 mm high
• Plastic sliding tarpaulins on both sides with load certification according to Code XL; welded horizontal and vertical strap reinforcements incl. turnbuckles as well as front and rear bolt locks, openable on all 4 corners, with ratchet tensioner at rear,
• tarpaulin sealed against external frame,
• tarpaulin manufacturer as per factory specifications, tarpaulin colour according to availability
• Aramid-reinforced plastic roof tarpaulin, translucent
• Bolted portal at rear with aluminium corner posts, upper crossbeam with forward-sliding cover, incl. fully opening double door in profile design covering entire load space height, each leaf equipped with 2 internal espagnolettes

COIL RECESS

• Useful length: approx. 7,400 mm – standard version according to VDI 2700 for coil diameters of 900 to max. 2,100 mm,
• with stacker-bearing cover made from 27 mm resin-coated plywood with trussing
• 5 pairs of racks = 1 x at front, 1 x approx. 1,840 mm (before centre of gravity), 1 x 2,520 mm, 1 x 3,680 mm, 1 x 5,330 mm,
• incl. 2 pairs of steel tubular safety supports, 8 0 x 8 0 x 5 mm, useful height: approx. 1,700 mm
• Inclinations on both sides made from 24 mm resin-coated plywood

POSTS/COVER

• 2 fixed aluminium corner posts at front, bolted, protruding from sides
• 3 centre posts on left in direction of travel, movable across entire length
• 3 centre posts on right in direction of travel, movable across entire length
• 4 rows of slat pockets, 1st pocket row at bottom 460 mm, spacing approx. 160/450/450 mm, with just 3 rows of aluminium pointed slats 100/25 mm
• Versus sliding cover with plastic brackets, forward-sliding with automatic elevation, limited backward movement (opened from above) = pushed together in loading area, with vertical and horizontal guide rollers = smooth operation
• Aluminium guide rail profile on both sides for sliding tarpaulins and posts, design height 140 mm
• Control rod for sliding tarpaulin (bracket on interior side protection)