Power – Sprays Ltd. – Water, Polymer and Twin Admixture Dispensers – WAAPS 3000

0,00

Technical Specifications

  • Water Inlet Valve Solenoid activated diaphragm type
  • Polymer Pump Tri-roller peristaltic pump rated at 8L per minute*
  • Admixture Pump (x2) Tri-roller peristaltic pump rated at 3L per minute*
  • Discharge Valve Pneumatic rotary action ball valve
  • Load Cell 50kg capacity, 0.01kg accuracy
  • Weight 150kg
  • Dimensions – Cylinder Mounting Frame 530mm wide x 1800mm high x 475mm deep – Electrical Control Panel 600mm wide x 600mm high x 210mm deep – Stand for Pumps 900mm wide x 1030mm high
  • Electricity Supply 380V, 50Hz
  • Air Supply 5.5bar (80psi)* Pump ratings are for water pumping against a pressure head of approximately 2m. Flow rates will vary according to the rheology of the liquid and the height to be pumped. The cylinder is designed to be installed 2-3m above ground level and to discharge directly into the mixer. If it is intended to pump liquids more than 2m, please refer to Power-Sprays.

Out of stock

SKU: 1058 Category:

Description

Technical Specifications

  • Water Inlet Valve Solenoid activated diaphragm type
  • Polymer Pump Tri-roller peristaltic pump rated at 8L per minute*
  • Admixture Pump (x2) Tri-roller peristaltic pump rated at 3L per minute*
  • Discharge Valve Pneumatic rotary action ball valve
  • Load Cell 50kg capacity, 0.01kg accuracy
  • Weight 150kg
  • Dimensions – Cylinder Mounting Frame 530mm wide x 1800mm high x 475mm deep – Electrical Control Panel 600mm wide x 600mm high x 210mm deep – Stand for Pumps 900mm wide x 1030mm high
  • Electricity Supply 380V, 50Hz
  • Air Supply 5.5bar (80psi)* Pump ratings are for water pumping against a pressure head of approximately 2m. Flow rates will vary according to the rheology of the liquid and the height to be pumped. The cylinder is designed to be installed 2-3m above ground level and to discharge directly into the mixer. If it is intended to pump liquids more than 2m, please refer to Power-Sprays.